●Ink drop state check method 6-30
Ink drops creation state confirmation table
Ink drop shape
Judgment Name Remarks
A mode Good
B mode Perfect
High-speed
small-diameter
mode
Two or fewer
small-diameter
drops
Allowable
Constant-speed
small-diameter
mode
Not
allowed
Low-speed
small-diameter
mode
Not
allowed
When the shape of the ink drops is not allowed, update to the optimum set value at par. “6.10 Excitation
V adjustment” and check again. Or contact your local distributor.
After the check, install the print head cover.
3
To Next Page
Loading...
