●Bar code, 2-dimensional code 9-4
Character
orientation
QR code printing Printing example Remarks
0 or 1
180-degree rotation
Rotated by 180 degrees
and printed.
Normal
Printed in normal
direction.
2 or 3
180-degree rotation
Printed in normal
direction.
Normal
Rotated by 180 degrees
and printed.
(5) Precautions when using QR Code and Micro QR
● Set as shown below for print item to which QR code or Micro QR is to be set:
(i) Number of lines : 1 line
(ii) Character size : 18
×24, 24×32 (for QR code), 12×16 (for Micro QR)
● Set barcode type on the print format screen.
● Set error correction level on the various print setup screen.
For Micro QR, printing will be performed in error correction level M even if level Q selected.
QR code: Type of size and maximum character number
Character size
18
×24 24×32 12×16
QR code size/Micro QR size
21
×21 25×25 29×29 15×15
No. of vertical dots (for speed calculation) 21 25 29 15
Error correction level M Q M Q M Q M
Max. number
of characters
Numbers only 34 27 63 48 101 77 18
Capital alphabetical characters,
numbers
20-29 16-22 38-58 29-43 61-96 47-72 11-15
Combination of alphabetical
characters, numbers and symbols
14-29 11-22 26-58 20-43 42-96 32-72 7-15
(The number of characters that can be coded differs according to the character string.)
● Input characters within the specified digit number for print item to which barcode has been set.
● When alphabet letters and numerals occur together number of characters which can be coded will vary
depending on character array.
●"QR code printing" is added on "User environment setup" screen. It makes users possible to select the
direction of QR code / Micro QR code to be printed.
●Please check if QR code / Micro QR code can be read properly by barcode reader before executing this
new function of "QR code printing".
To Next Page
Loading...
