Chapter 4 Explanation of Functions
4-76
4.2.84 Function code display restriction
The function code display restriction function allows you to arbitrarily switch
the display mode or the display content on the digital operator.
Function code display
restriction
Function-specific display
Selection of the code to be displayed (All
codes are selectable.)
(1) Function-specific display mode
If a specific function has not been selected, the monitor does not display the parameters concerning the specific
function.
The following table lists the details of display conditions:
Parameter displayed when the display condition is met
A005, A006, A011 to A016, A101, A102, A111 to A114, C081 to
C083, and C121 to C123
d025 to d027, P100 to P131
A = 03, 04, or 05 and H002 = 00
A = 03, 04, or 05 and H002 = 01 or 02
A044 and/or A244 = 03, 04, or 05
d008 to d010, d012, b040 to b046, H001, and H070 to H073
d004, A005, A006, A011 to A016, A072 to A078, A101, A102,
A111 to A114,
C044, C052, C053, C081 to C083, and C121 to C123
b013, b213, and/or b313 = 02
b037: Function code display restriction
U001 to U012: User parameters