Hitachi SJ700-4000HFU2

Chapter 4 Explanation of Functions
4-77
No.
Display condition
Parameter displayed when the display condition is met
27
One of C001 to C008 = 05 and A019 = 00
A028 to A035
28
One of C001 to C008 = 06
A038 and A039
29
One of C001 to C008 = 07
A053 to A055 and A059
30
One of C001 to C008 = 08
F202, F203, A203, A204, A220, A244, A246, A247, A261, A262,
A292, A293, A294, b212, B213, H203, H204 and H206
31
One of C001 to C008 = 08 and A041 = 01
A246 and A247
32
One of C001 to C008 = 08 and A244 = 00 or 01
A241, A242 and A243
33
One of C001 to C008 = 08 and A244 = 03 or 04
H202, H205, H250, H251 and H252
34
One of C001 to C008 = 08 and A244 = 04
H260 and H261
35
One of C001 to C008 = 08, A244 = 03 or 04, and
H202 = 00
H220 to H224
36
One of C001 to C008 = 08, A244 = 03 or 04, and
H202 = 01 or 02
H230 to H234
37
One of C001 to C008 = 08 and A094 = 01 or 02
A295 and A296
38
One of C001 to C008 = 11
b088
39
One of C001 to C008 = 17
F302, F303, A303, A304, A320, A342, A343, A392, A393, b312,
b313 and H306
40
One of C001 to C008 = 18
C102
41
One of C001 to C008 = 27, 28, or 29
C101
42
One of C021 to C008 = 03
C040 and C041
43
One of C021 to C008 = 26
C040 and C111
44
One of C021 to C008 = 02 or 06
C042 and C043
45
One of C021 to C008 = 07
C055 to C058
46
One of C021 to C008 = 21
C063
47
One of C021 to C008 = 24 or 25
C045 and C046
48
One of C021 to C008 = 33
C142 to C144
49
One of C021 to C008 = 34
C145 to C147
50
One of C021 to C008 = 35
C148 to C150
51
One of C021 to C008 = 36
C151 to C153
52
One of C021 to C008 = 37
C154 to C156
53
One of C021 to C008 = 38
C157 to C159
54
One of C021 to C008 = 42
C064
(2) User-setting display mode
The monitor displays only the codes and items that are arbitrarily assigned to user parameters (U001 to U012), except
codes "d001", "F001", and "b037".
(3) Data comparison display mode
The monitor displays only the parameters that have been changed from the factory settings, except all monitoring
indications (d***) and code "F001".
Note that the settings of input span calibration and input zero calibration (C081 to C083 and C121 to C123), and
thermistor input tuning (C085) are not always displayed.