Hitachi SJ700-4000HFU2

Chapter 2 Installation and Wiring
2-14
Terminal layout
Inverter model
SJ700D-055，075L
FF3/FEF3/FUF3
SJ700D-055，075H
FF3/FEF3/FUF3
R0 and T0: M4
Ground terminal: M5
Other terminals: M5
SJ700D-110L
FF3/FEF3/FUF3
SJ700D-110H
FF3/FEF3/FUF3
R0 and T0: M4
Ground terminal: M5
Other terminals: M6
SJ700D-150 to 185L
FF3/FEF3/FUF3
SJ700D-150 to 220H
FF3/FEF3/FUF3
R0 and T0: M4
Ground terminal: M6
Other terminals: M6
SJ700D-220L
FF3/FEF3/FUF3
R0 and T0: M4
Ground terminal: M6
Other terminals: M8
[Method of enabling/disabling the EMC filter function]
Enabling the EMC filter
Disabling the EMC filter
(factory setting)
Disabling the EMC filter
(factory setting)
[Method of enabling/disabling the EMC filter function]
Enabling the EMC filter
R
(L1)
S
(L2)
T
(L3)
PD
(+1)
P
(+)
N
U
(T1)
V
(T2)
W
(T3)
Charge lamp
Jumper connecting
terminals PD and P
When not using the DCL,
do not remove the jumper
from terminals PD and P.
G
G
RB
(-)
R0
T0
Ground terminal with jumper (shaded in the figure) to
enable/disable the EMC filter function.
R
(L1)
S
(L2)
T
(L3)
PD
(+1)
P
(+)
N
U
(T1)
V
(T2)
W
(T3)
Charge lamp
Jumper connecting
terminals PD and P
When not using the DCL,
do not remove the jumper
from terminals PD and P.
G
G
RB
(-)
R0
T0
Ground terminal with jumper (shaded in the figure) to
enable/disable the EMC filter function