Hitachi UX2 - Related manual; Trademark

15
1.3.4-3 Supplement
● When transmitting print data together with the print contents, send the print contents last.
1.3.4-4 Example of print data registration transmission
(1) Example of registering by specifying message name 12
02H
1FH
21H
31H
30H
30H
31H
32H
03H
STX
ESC2
!
1
0
0
1
2
ETX
[Transmission Result]
Current print data is registered under message number 12.
(2) Example of registering by specifying message name
02H
1FH
21H
31H
30H
30H
31H
32H
1FH
21H
32H
41H
42H
43H
03H
STX
ESC2
!
1
0
0
1
2
ESC2
!
2
A
B
C
ETX
[Transmission Result]
Message name "ABC" is assigned to current print data and is registered under message number 12.
1.3.5 Print Condition Transmission
1.3.5-1 Text
(1) Line count / print format uniformity
ESC2
Header 22H
Classification 31H
● Line count and print format are made uniform for all print items.
● Line count of all rows are made uniform based on the first row.
● Space between stages, character size, space between characters, whether or not to use
bar code and double width size are made uniform based on the setting value of the first
print item.
● Send the message independently. The message cannot be sent together with print format,
print specs, and print contents.
● If transmission is made to the message which format setup is ''Free layout", a communication error
will occur.
(2) Format setup change
ESC2
Header 22H
Classification 33H
Format setup
● This transmission can change the format setup.
● The print data will be adjusted to match the "After-change" Format setup.
● Print condition transmission shall be made independently.
Print condition can not be transmitted with Print format or Print specification or Print description.
Header, classification
Print data message number
Header, classification
Print data message number
Header, classification
Message name
Format setup (30H or 32H)
Format setup
30H:Individual
32H:Free layout