Hitachi UX2 - Response Time; Time Interval (T1) between External Device Communication and IJ Printer Response

52
1.5.2 Response Time
1.5.2-1 Time interval (T1) between external device communication and
IJ printer response
Baud rate (bps）
T0 Maximum time (ms)
150 to 1200
10
2400 to 115200
5
(1) When Print format is set to "Individual"
Time interval (T1) between external device communication and IJ printer response
No.
Transmission type
Conditions
T1 Maximum Time（ms)
Remarks
Within 24 items
25 items or more
1
Print description
The print message transfer
ACK condition is t=fixed.
20
55
*1
The print message transfer
ACK condition is t=async.
Ｍ
１０
+ ５５
Ｍ
１０
+ １０５
*1
*2
2
Print data recall
－
20
30
3
Print data
registration
－
1000
1000
4
Print conditions
Print specifications
10
10
5
Print format
20
50
6
Line count/print format
uniformity
20
50
7
Format setup change
100
100
Free layout
－
－
－
8
User pattern
character
－
15×N + 10
15×N + 10
9
Date/time setup
－
5
5
*3
10
Remote operation
Error reset
15
15
Operation start, operation
stop, deflection voltage
control
100
100
●When the Print format is set to "Individual" and Free layout transmission is made, a communication error
will occur.
*1 For "t=fixed" and "t=async.", see "Communication User's Manual (Common)".
*2 When there is a data matrix, QR code, Micro QR, GS1 Data Bar setting and Dotcode setting,
the time is as follows.
*3 If time changes just before ACK transmission, ACK transmission may be delayed about 20 ms.
M: Number of communication characters
N: Number of communication patterns