Hitachi UX2 - 1.2.8. Gutter Cleaning

34
(2) Specify Horizontal/Vertical directions and move
● Specify the number of dots for moving and the print item will be moved.
● Horizontal and Vertical move
ESC2
Header 24H
Classification 41H
Item number
Horizontal sign
10000s place
1000s place
100s place
10s place
Unit place
Vertical sign
10s place
Unit place
-- Either plus(+) or minus(-) sign to be input for both Horizontal/Vertical directions.
-- In case there will be NO horizontal move, input either "+00000" or "-00000".
-- In case there will be NO vertical move, input either "+00" or "-00".
● Horizontal move
ESC2
Header 24H
Classification 42H
Item number
Horizontal sign
10000s place
1000s place
100s place
10s place
Unit place
-- Either plus(+) or minus(-) sign to be input for Horizontal direction.
-- In case there will be NO horizontal move, input either "+00000" or "-00000".
● Vertical move
ESC2
Header 24H
Classification 43H
Item number
Vertical sign
10s place
Unit place
-- Either plus(+) or minus(-) sign to be input for Vertical direction.
-- In case there will be NO vertical move, input either "+00" or "-00".
Item number
(1 to 100)
(Contd.)
Vertical (Y) direction
(-29 to +29)
(Contd.)
Horizontal (X) direction
(-31999 to +31999)
Horizontal sign/Vertical sign
(Input either one of the two.)
2BH: " ＋ (plus)"
2DH:" － (minus)"
Item number
(1 to 100)
(Contd.)
Horizontal (X) direction
(-31999 to +31999)
Horizontal sign
(Input either one of the two.)
2BH: " ＋ (plus)"
2DH:" － (minus)"
Item number
(1 to 100)
Vertical (Y) direction
(-29 to +29)
Vertical sign
(Input either one of the two.)
2BH: " ＋ (plus)"
2DH:" － (minus)"