Hitachi VM-2300A User Manual

These buttons are used for title making buttons
when the “TITLE” button is pressed.
(See “TITLE RECORDING” on page 32.)
“F.FWD” Button
Press this button during stop or rewind mode,
and fast-forwarding starts. “FAST FWD” indi-
cation appears in the viewfinder whenever the
tape counter or time remaining is present.
Press the button during playback of tape, and
the tape is played back in the forward direction
approximately 3 times faster than the normal
speed to confirm the recorded content.
Press
“PLAY”
button
to
return
to
normal
play-
back
mode
or
press
“STOP”
button
to
stop
tape
movement.
NOTE: You can also visually scan forward
when
the
camera/recorder
is
record/pause
(stand-by) mode by pressing and holding this
button.
EDN|f
ecuse
Q@
x"
eg
oO
ic
iste
ee,
~)
“STILL (REC/PAUSE)” Button
gs When this button is pressed during recording,
the
tape
stops
and
the
camera/recorder
enters
the
record/pause
(stand-by)
mode.
When
this
button
is
pressed
again,
the
tape
runs
to
re-
sume
recording.
This
button
may
be
also
used
to
display
a
still
picture
during
playback
mode.
“EAR” phone Jack
Sound
being
recorded
by
the
microphone
or
~
played
back
may
be
monitored
by
attaching
earphone (Not supplied) to this jack.
“TRACKING”
Control
Buttons
%&
Used
when
playing
a
tape
recorded
on
another
VCR.
Adjust
for
best
picture.
Ejecting
the
cas-
sette
or
pressing
both
buttons
at
the
same
time
returns
the
tracking
to
the
normal
position.
“VIDEO DUB” Button
‘This
button
is
used
to
record
new
video
in
place
of
existing
video
without
erasing
the
audio.
See
page
35.
“AUDIO DUB” Button
‘This
button
is
used
to
record
new
audio
in
place
of
existing
audio
without
erasing
the
video.
See
page
34.
%, “STOP” Button
*
The
“STOP”
button
is
used
to
stop
playback,
rewind,
and
fast
forward
operations.
The
“STOP”
button
has
no
effect
during
record
operation.
E19

Hitachi VM-2300A Specifications

General

Brand	Hitachi
Model	VM-2300A
Category	Camcorder
Language	English