Hitachi VSP 5000 Series - Page 16

No. Item Description
3 Date, time* The date, time and the time dierence between UTC and the
local time in the format of "YYYY-MM-DD-Thh:mm:ss.s ±
hh:mm".
■
YYYY: year, MM: month, DD: day
■
hh: hour, mm: minute, ss.s: second in one decimal place.
■
± hh:mm: hours and minute of the time dierence. "Z" is
displayed instead of "± hh:mm" when there is no time
dierence between UTC and the local time, such as
"2005-12-26T:23:06:58.0Z".
4 Detected
location
The host name (SVP).
5 Program name The detection entity identier (Storage).
6 Process name The process name (-).
7 Message ID The message ID (-).
8 Structured data The structured data (-).
9 Unied
specication
identication
The unied specication identier (CELFSS).
10 The revision number of the unied specication document
(1.1).
11 Message
identication
The serial number of the syslog header information.
12 Type of audit
event
The category name of the event.
■
Authentication of RMI, FC-SP, or Device Manager - Storage
Navigator.
■
CongurationAccess indicates setting from Device
Manager - Storage Navigator, SVP or host.
■
Maintenance indicates SVP operations.
■
AnomalyEvent indicates reached the maximum of the
Audit Log, etc.
■
ExternalService indicates remote maintenance operations
through SVP.
13 Result of audit
event
■
Success: Normal end. The operation has ended normally.
■
Failed: Error (xxxx-yyyy). The operation has ended
abnormally.
■
Failed: Warning (xxxx-yyyy). The operation has partly ended
abnormally or was canceled during the operation.
Syslog
Chapter 1: Failure monitoring
Hitachi Alert Notication Guide for VSP5000 Series 16