Hitachi VSP 5000 Series - Page 17

No. Item Description
"xxxx-yyyyy" indicates error codes and it is output only for
Device Manager - Storage Navigator operations.
14 Account
identication
The user name in the format of "uid=user name".
■
<system> is output when the category name is
AnomalyEvent.
■
<DKCMaintenance> is output for SVP operations.
■
<Host> is output for commands from host.
15 Hardware
identication
The ID (R900) to identify the model name of the product and
the serial number divided by a colon.
16 Related
information
The location identication name set by the user in the Syslog
tab of Edit Audit Log Settings window.
17 Detailed
information
Identication of the host sending the request.
This information is output when a command is received from
the host unless it is FC-SP authentication.
18 Collective operation identier. This is a serial number that
identies those multiple lines displayed by one operation are
the same operation.
Outputs only if the log type information is "BasicLog" and the
category name is other than "AnomalyEvent".
19 Log type information:
■
BasicLog: basic information
■
DetailLog: detailed information
No output when the category name is "AnomalyEvent".
20 Identication of the application. This information is output
when commands are sent from the host.
21 Detailed
information
The same information contained in the basic information of
the audit log le, such as interface, task name, function name,
operation name, parameter, result, and serial number. Task
name is output only when a task is registered using Device
Manager - Storage Navigator. No parameter is output if the
operation has no parameters. No serial number is output
when the category name is "AnomalyEvent".
22 The same information contained in the detailed information
of the audit log le.
No serial number is output when the category name is
"AnomalyEvent".
Syslog
Chapter 1: Failure monitoring
Hitachi Alert Notication Guide for VSP5000 Series 17