MAINTENANCE
7-4
MAINTENANCE GUIDE TABLE
The maintenance guide table is affixed to the reverse side of
the tool box cover. Lubricate and/or service the parts at the
intervals as instructed in the table so that all necessary mainte-
nance can be performed regularly.
•
Symbol Marks
The following marks are used in the maintenance guide
table.
Grease
(Front Joint Pin, Swing Bearing, Swing
Gear)
Hydraulic Oil Filter
(Pilot Oil Filter, Hydraulic Oil Tank Filter,
Suction Filter)
Gear Oil
(Travel Reduction Device, Swing Reduction
Device)
Air Cleaner Element
Engine Oil
Coolant
(Long-Life Coolant)
Engine Oil Filter
Fuel Filter
(Fuel Main Filter, Pre-Filter)
Hydraulic Oil
To Next Page
Loading...
