SAFETY
S-30
HANDLE CHEMICAL PRODUCTS SAFELY
•
Direct exposure to hazardous chemicals can cause serious
injury. Potentially hazardous chemicals used with your ma-
chine include such items as lubricants, coolants, paints, and
adhesives.
• A Material Safety Data Sheet (MSDS) provides specific de
-
tails on chemical products: physical and health hazards,
safety procedures, and emergency response techniques.
• Check the MSDS before you start any job using a hazard
-
ous chemical. That way you will know exactly what the
risks are and how to do the job safely. Then follow proce-
dures and use recommended equipment.
• See your authorized dealer for MSDS’s (available only in
English) on chemical products used with your machine.
515-E01A-0309
DISPOSE OF WASTE PROPERLY
•
Improperly disposing of waste can threaten the environ-
ment and ecology. Potentially harmful waste used with
HITACHI equipment includes such items as oil, fuel, coolant,
brake fluid, filters, and batteries.
• Use leakproof containers when draining fluids. Do not use
food or beverage containers that may mislead someone
into drinking from them.
• Do not pour waste onto the ground, down a drain, or into
any water source.
• Air conditioning refrigerants escaping into the air can
damage the Earth’s atmosphere. Government regulations
may require a certified air conditioning service center to
recover and recycle used air conditioning refrigerants.
• Inquire on the proper way to recycle or dispose of waste
from your local environmental or recycling center, or from
your authorized dealer.
516-E01A-0226
SA-309
SA-226
To Next Page
Loading...
