Version 1.0, 11/2016. Copyright 2012 Hitron Technologies
92
Version 1.0, 11/2016. Copyright 2016 Hitron Technologies
92
Hitron CODA-4x8x User’s Guide
Encrypt Mode Select the type of encryption you want to use on the
2.4GHz network. The options that display depend on the
options you selected in the other fields in this screen.
Select AES to use the Advanced Encryption
Standard.
Select TKIP to use the Temporal Key Integrity
Protocol.
Select TKIP/AES to allow clients using either
encryption type to connect to the CODA-4x8x.
NOTE: Use of the TKIP encryption standard limits the
wireless network speed to 54Mbps (802.11g
speed).
Password Enter the security key or password that you want to use
for the 2.4GHz wireless network. You will need to enter
this key into your wireless clients in order to allow them
to connect to the network.
RADIUS Auth Server
Address
(0.0.0.0~255.255.255.
255)
When using the WPA-Enterprise security mode, enter
the IP address of the RADIUS server on the network,
which the CODA-4x8x will use for security
management.
RADIUS Auth Server
Port (0~65535)
When using the WPA-Enterprise security mode, enter
the port on which the CODA-4x8x should connect to the
RADIUS server on the network.
RADIUS Auth Shared
Secret
When using the WPA-Enterprise security mode, enter
the authentication key that will allow the CODA-4x8x to
communicate with the RADIUS server on the network.
Max Inactive Time (in
seconds)
When using the WPA-Enterprise security mode, enter
the maximum number of seconds a wireless client may
remain inactive on the network before it must re-
authenticate.
Save Changes Click this to save your changes to the fields in this
screen.
Cancel Click this to return the fields in this screen to their last-
saved values without saving your changes.
Help Click this to see information about the fields in this
screen.
Table 23: The Wireless: Basic Settings: 2.4G Screen (continued)
To Next Page
Loading...
Need help?
General
