17
A99UE13-1304
12. LAK6B Series:
12.1 Combine uniaxial to 6-axial actuators, and provide an intelligent controller as well
as application software according to customer requirements.
12.2 The output power of a controller is 216VA (The output voltage is 24VDC.).
12.3 1.3Ah lead acid batteries can be selected, built-in auto charge circuit without an
external charger.
12.4 Over current protection and slow start.
12.5 Energy-saving device and replaceable fuse with spare one on a socket.
12.6 External grounding and LED power indication.
12.7 Fuse specication：4A/20mm(100/110/220/230VAC).
11.5 Externally connect the power supply to provide higher driving power.
11.6 Over current protection and slow start are provided to avoid customer misuse.
11.7 LAK4N can combine LAN1 to save the space and easily install (Please refer to the
gure below.).
11.8 Fuse specication：4A/20mm(100/110/220/230VAC)，
15A/20mm(Battery).
11.9 Note: Please charge battery for at least 8 hours before initial use.
To Next Page
Loading...