HMS AnyBus-X AB7607 - Page 29

Configuration 3-13
© 2005 HMS Industrial Networks AB7607 User manual
IP Address Initialization
The following flowchart describes how the IP configuration is determined when
the Anybus-X is powered up.
Figure 3-4 IP Configuration Initialization Sequence
Start
DIP Switch = 0
No
Yes
IP = 192.168.1.n
Sub = 255.255.255.0
No Gateway
Valid
Configuration
File?
Yes
No
DHCP
Enabled?
Yes
No
Use configuration
from file
DHCP
Config
Received?
Yes
Use received
configuration
No
Valid
Configuration
File?
Yes
No
Remain offline
Request config
from DHCP/
BOOTP Server.
Timeout 30 secs
End
DIP Switch =
0xFF
No
Yes
IP = 192.168.1.255
Sub = 255.255.255.0
No Gateway
Enable ARP/Ping
Address Option