Quick Start 4-13
© 2005 HMS Industrial Networks AB7607 User manual
• You should see a message similar to below indicating a connection.
Example:
Reply from 65.106.34.252 Bytes=32 Time=271ms TTL=30
• Type ‘arp -d <IP address>’
Example:
arp -d 65.106.34.252
The Anybus-X module will now adopt the IP address that was specified in the ‘arp
-s’ command.
• Set all 8 switches on the IP Address Configuration DIP switch to the OFF
position.
To Next Page
Loading...
