File System 8-18
© 2005 HMS Industrial Networks AB7607 User manual
‘\web\BW_NodeIdle.htm’ (Idle Nodes)
Click on the “Idle Nodes” link to display a web page providing a status table
of the possible 63 DeviceNet nodes with an indication of whether each node is
idle or in a configuration state. This is valid for nodes configured in the Anybus-
X’s scanlist. Each MAC ID will have the word “Idle” or a dash (-) next to it.
‘\web\BW_NodeFaulted.htm’ (Faulted Nodes)
Click on the “Faulted Nodes” link to display a web page providing a status table
of the possible 63 DeviceNet nodes with an indication for each node in the Any-
bus-X’s scanlist of whether the Anybus-X and node are communicating.
‘\web\AutoVerifyTbl.htm’ (Invalid Nodes)
Click on the “Invalid Nodes” link to display a web page providing a status table of
the possible 63 DeviceNet nodes with an indication for each node in the Anybus-
X’s scanlist of whether the node has failed auto-verification (the device’s type is
incorrect).
‘\web\BW_NodeStatus.htm’ (Node Status)
Click on the “Faulted Nodes” link to display a web page providing a status table
of the possible 63 DeviceNet nodes with additional status information for each
node in the Anybus-X’s scanlist.
To Next Page
Loading...
