Document No: C-41-02490-9
20
3.12 Indicator lamp
4 LED display indicates the UST status. This LED display is located in the front of the UST as shown in
Figure 3-11. Table 3-4 shows the description of the LEDs.
Figure 3-11 Indicator lamp
Table 3-4 Description of Indicator lamp
Blue display : Power supply
ON during normal operation, blinks during start up, configuration
and malfunction state.
Orange display : Output 1
ON during the object detection in the region of output 1.
Orange display : Output 2
ON during the object detection in the region of output 2
Orange display : Output 3
ON during the object detection in the region of output 3.
Power supply display
(Blinks during start up, configuration and
malfunction state)
To Next Page
