HOKUYO AUTOMATIC UST-05LN - UST Area Designer Application Software; Area Designer; System requirements

Document No: C-41-02490-9
39
7. UST Area Designer application software
Install application software (Area Designer) in a supported operating system and connect UST using a USB
cable. Area Designer has the following functions:
 Configuration of detection area
 Configuration of various UST functions
 Display of measurement data
 Record and playback of measurement data
 Project data management (save and open of project data).
7.1 Area Designer
Application software (Area Designer) can be downloaded from our homepage.
For details of installation and operation please refer to Area Designer UST Series sensor configuration tool
Instruction manual.
7.2 System requirements
Table 7-1 Minimum system required for Area Designer
PC
CPU
Pentium® Ⅳ processor of 800MHz or above
RAM
512MB or more
Hard disk
150MB minimum free space
Compatible OS
Microsoft
Ⓡ
Windows 7 Professional
Microsoft
Ⓡ
Windows 8.1
Microsoft
Ⓡ
Windows 10
Display
High color (16bit color) or above , 800×600 dot or above
(Note) Microsoft, Windows are the registered trademarks of Microsoft Corporation USA.
The operation in the below system environment cannot be guaranteed.
 Other OS that is not mentioned above.
 NEC PC98 series and its compatible device.
 Self made PC
 Multi boot environment
 Multi monitor environment