HOKUYO AUTOMATIC UST-05LN - Cleaning the optical window

Document No: C-41-02490-9
45
8.5 Cleaning the optical window
Dust covering the optical windows affects the detection capability of the UST. When you install the
UST in dusty environment, regular cleaning of the optical window is needed.
According to the contamination situation follow the below method:
 Wipe the optical window with a clean soft cloth.
 Clean the optical window with a soft brush.
 Blow off the dust on optical window using air-blower.
 Clean the optical window with mild detergent if it is contaminated with oil/grease particles.
 Disconnect the system when cleaning the optical window.
 If above-mentioned contents are not followed it could lead to serious
damage on the machine, critical injury and death.
 Do not use organic solvents (such as thinner, benzene and acetone) for
cleaning. Plastics parts and paint might be affected.