Need help?Do you have a question about the HOMEGRID Stack'd Series and is the answer not in the manual?
Importance of reviewing the manual for correct utilization and warranty.
Explains the meaning of DANGER, WARNING, NOTE, and ELECTRONIC DEVICE symbols.
Lists essential tools required for installation, including PPE and measurement devices.
Specifies torque values for different screw types used in installation.
Details environmental and physical requirements for the installation site.
Lists all components included in the HomeGrid system package.
Provides guidance on battery cable selection and connection, including distance limits.
Instructions for unboxing and identifying system components and hardware.
Steps for physically stacking battery modules and the BMS unit.
Explains the purpose and configuration of DIP switches for system operation.
Details how to set DIP switches for module addressing and configuration.
Guides through powering on modules and the BMS for system detection.
Configures DIP switches for parallel setups to address and identify stacks.
Connects multiple battery stacks using communication cables for parallel operation.
Enables the master BMS to detect the number of paralleled systems.
Guides on attaching battery cables to the terminal busbars.
Connects the inverter to the BMS using a communication cable.
Provides instructions for downloading the HomeGrid mobile application.
Guides installers on creating a HomeGrid user account.
Explains how to create installer or end-user sub-accounts.
Process for linking devices and accounts with HomeGrid support.
Step-by-step guide for connecting the HomeGrid system to Wi-Fi.
Details the process of configuring Wi-Fi settings via the HomeGrid app.
Verifies the system's connection to the local Wi-Fi and HomeGrid servers.
Lists compatible inverter brands for the HomeGrid Stack'd Series.
Provides wiring pin-out details for connecting inverters to the BMS.
Importance of reviewing the manual for correct utilization and warranty.
Explains the meaning of DANGER, WARNING, NOTE, and ELECTRONIC DEVICE symbols.
Guidelines for placing and maintaining the HomeGrid equipment safely.
Procedures for regular verification and upkeep of the system.
Details on the BMS display, error codes, DIP switches, and connectors.
Description of the 4.8 kWh battery module and its base stand.
Step-by-step instructions for powering on the HomeGrid system.
Step-by-step instructions for safely powering down the HomeGrid system.
Procedures to follow in case of hazardous situations like flooding or fire.
Describes connecting the system for whole home backup via line side tap.
Describes connecting the system for whole home backup via load side tap.
Configures the system to power only critical loads during off-grid operation.
Addresses common issues and provides solutions for system operation.
To Next Page
General