Honda BF15D - Page 182

12)Set the cylinder head cover gasket to the cylinder head
cover, then install the cylinder head cover.
13)Tighten the four head cover bolts securely.
14)Secure the throttle cable by hooking
to the clamp of the
cylinder head cover (tiller handle type only).
[31 CY LlNDER PI21 6/mm HEAD
HEAD COVER
COVER BOLT
(4)
15)lnstall the spark plugs and connect the spark plug caps
and thermo sensor connector.
16) Reinstall the removed parts:
- starter case B (P. 7-10).
- recoil starter (P. 7-9).
- neutral start cable (P. 7-1).
- left and right engine under covers (P. 5-2 and 3).
- engine cover.
121
PLUG CAP SPARK PLUG
I
10-20