BF15DmBF20D
111 121
Except tiller handle
S
type
1)
Apply grease
to
new swivel case bushings and install
TILTING BOLT CAP TILTING SHAFT
them
to
the swivel case.
I
7)
Apply grease
to
the threads of the tilting shaft, mounting
hole and wave washer.
Install the left stern bracket, carrying handle, and wave
washer by aligning the groove with the pin and install the
tilting shaft.
Install the wave washer and right stern bracket.
Loosely install the
7/84 4UNF
self-locking nut.
Install the
8
mm distance collar,
8
x
163 mm bolt,
8
mm
washer and
8
mm self-locking nut. Tighten the
8
rnm self-
locking nut
to
the specified torque.
TORQUE:
21 Nom (2.1 kgfom, 15 Ibfoft)
Tighten the
7/8-14UNF
self-locking nut
to
the specified
torque.
TORQUE:
17 Nom (1.7 kgfom, 12 Ibfoft)
Install the adjusting rod.
171
8
x
163 mm
BRACKET BUSHING
(2)
131
22
mm
WAVE WASHER (2)
HT STERN BRACKET
TILTING BOLT
ING NUT
-
1131
8
mm
DISTANCE ADJUSTING ROD
COLLAR
1
2-1
0
To Next Page
Loading...
