Honda BF15D - Page 222

BF15DSBF20D
6) Engage the release rod to the reverse lock arm.
7) Apply grease to the shaft pivot holes of the swivel case
and install the reverse lock arm, reverse lock collar and
reverse lock shaft A.
8) Install the 6 mm plain washer and install a new 2 mm cot-
ter pin, and spread the ends as shown.
9) Apply grease to the reverse lock hook pivot holes of the
10)lnstall the reverse lock springs, reverse lock hook and
1l)lnstall the
6 mm plain washer and install a new 2 mm cot-
reverse lock arm.
reverse lock shaft
B.
ter pin, and spread the ends as shown.
r11
REVERSE
LOCK CQLLAR
PI
REVERSE
LOCK ARM
PIN
11 1
REVERSE
r21
REVERSE LOCK
LOCK
HOOK SPRING (2)
'
PIN
12-1 6