BF15D-BF20D
12)Check the tilt lever bushing A for wear or damage,
replace with new one
if
necessary.
13)Apply grease to the tilt lever bushing
B.
14)lnstall the tilt arm, tilt shaft and tilt shaft bracket.
15)Turn the tilt shaft until the locking tab faces toward up,
and align the pin holes of the tilt shaft bracket with pin
hole of tilt shaft and set a new 3
x
25
mm spring pin.
16)Drive the spring pins using a commercially available pin
driver until the both projected distances are equally as
shown.
TILT 11
I
k
SHAFT
141
TILT SHAFT
BRACKET
YliT
LEVER
BUSHING B
(2)
(commercially
[l]
3
mm PIN DRIVER
[31
3x
25
mm
SPRING PIN
PI
TILT SHAFT
BRACKET
1
1
2-1
7
To Next Page
