Honda BF15D - Page 25

BF15DmBF20D
6. Disconnect the pulse generator coil
wire connector, and check for resis-
tance
(P. 9-5).
Resistance: 351 - 429 Q
- Abnormal Replace the pulse generator coil.
I
Normal
4
7. Check for voltage leakage caused
by damaged high tension wire insu-
lation. Check the ignition coil resis-
tances
(P. 16-28).
Resistance:
Primary: 0.8
- 1.0 R
Secondary: 23.0 - 34.8 k R
Normal
8. Remove the ignition control module
and check for resistance between
the terminals
(P. 16-23).
2
Normal
open circuit. Replace
or repair the wire
harness.
Abnormal
+ I Replace the ignition coil
~ Abnormal -4 Replace the ignition control module.
I
2-1 7