BFI 5DoBF20D
5)
Connect the starter cable to the starter magnetic switch
and adjust the terminal direction
so
that the starter cable
contacts to the clamp bracket on the starter magnetic
switch body
as
shown.
6) Tighten the self-locking nut t the specified torque.
TORQUE:
5.5
N-m (0.55 kgfAm,
4.0
IbfAft)
7)
Secure the starter cable and control box wire harness
(Remote control type only) with the cable band on the
starter magnetic switch.
121
6
mm
SELF-LOCKING NUT
5.5
N
rn
(0.55
kgf
rn,
4.0
Ibf
ft)
/
16-4
To Next Page
