Honda BF75 - Trim Limit Adjustment

17
To “Conguring the settings” (P.8)
(6) Tilt Limit Reset
You can reset the tilt limit position (tilt upper limit position).
• Under the following conditions, Tilt Limit Reset is grayed
out and cannot be congured.
– When the engine is running
– When the trim tilt angle sensor is defective
– When DLC (dealer's tool) is connected
1. Use the [
∧
] or [
∨
] button to select BOAT SET and press the
[ENTER] button.
2. Use the [
∧
] or [
∨
] button to select Tilt/Trim Preset and
press the [ENTER] button.
3. Use the [
∧
] or [
∨
] button to select Tilt Limit Reset and
press the [ENTER] button.
4. Press the [ENTER] button.
• When the Tilt Limit Reset setting is successfully completed,
the COMPLETE pop-up window appears.
• If the Tilt Limit Reset setting is not completed, the FAILED
pop-up window appears. Retry setting from step 3.
• When the reset is completed, is displayed next to Tilt
Limit Reset.