HYDRAULIC DISC BRAKE
CALIPER PISTON O.D.
Check the piston for scoring, scratches or
other defects. Measure the piston diameter
with a micrometer.
SERVICE LIMIT:
38.105
rnrn
(1.5002
in.)
CALIPER CLYINDER I.D.
Check the caliper cylinder for scoring,
scratches or other defects. Measure the inside
diameter of the caliper cylinder bore.
SERVICE LIMIT:
38.215
rnrn
(1.5045
in.)
CALIPER CARRIERICARRIER
DISASSEMBLY
Remove the speedometer cable clamp.
Remove the carrier with caliper
B.
Remove the caliper shafts off the carrier and
caliper
B
while rotating them by hand. Avoid
damaging the boots.
CALIPER CARRIERICALIPER
B
ASSEMBLY
Wash all the removed parts. Coat the O-rings
with silicon grease or brake fluid and install
into place in the shaft center grooves.
whenever disassembled. Replace the
Install the boots on the carrier.
Date of Issue: September, 1977
o
HONDA MOTOR
co.,
LTD.
14-9
To Next Page
Loading...
