uuOperating the Switches Around the Steering WheeluPOWER Button
198
This function allows you to automatically change the power mode ON or VEHICLE
OFF when entering or exiting the vehicle without using the POWER button.
When entering the vehicle:
The power mode will change to ON when you enter the vehicle while carrying the
keyless remote and close the driver’s door.
u After this, if you depress the brake pedal, the power system will turn on and
the (ready) indicator will turn on.
2 Starting to Drive P. 383
When exiting the vehicle:
The power mode will change to VEHICLE OFF when you exit the vehicle while
carrying the keyless remote and close the door.
u If you leave the vehicle, lock the doors.
2 Locking/Unlocking the Doors from the Outside P. 175
■
Auto Power ON/OFF
1Auto Power ON/OFF
The power mode will not change to ON when
entering the vehicle in the following situations:
• The bonnet is open.
• The power mode was turned to VEHICLE OFF with
the POWER button the last time the vehicle was
exited.
The power mode will not change to VEHICLE OFF
when exiting the vehicle in the following situations.
• The transmission is in a position other than (P.
• The driver's seat belt is fastened.
• “Yes” was chosen during Auto Power OFF
guidance.
• The keyless remote is inside the vehicle.
The Automatic Power ON/OFF function can
shut-off the vehicle’s climate control system
even if you intend for it to remain on after
leaving the vehicle. If the vehicle is exposed
to temperature extremes and the climate
control system shuts off, the vehicle interior
may become dangerously hot or cold,
creating a risk of injury or death for any
child, person needing assistance, or animal
left inside. Do not leave children, persons
needing assistance, or animals unattended
in the vehicle.
20 2EX JSS (KE KG)-32TYF6000.book 198 ページ ２０２０年３月６日 金曜日 午後６時５８分
To Next Page
Loading...
