TuxedoW Home Automation and Security System User Guide
9
Disarming the System
IMPORTANT: If you return to your home or business and the main burglary alarm is sounding, DO NOT enter the premises, but call
the police from a safe location nearby. If you return to your home or business after an alarm has occurred and the main sounder has
shut itself off, the keypad beeps rapidly upon entering, indicating that an alarm has occurred during your absence. LEAVE
IMMEDIATELY and CONTACT THE POLICE
from a safe location nearby.
The system may be disarmed using either of two methods. One method is employed when you enter the premises and the other is
when you have been in the premises with the system armed (i.e., Stay and Night arming modes).
To disarm the system when entering the premises:
The touchscreen automatically displays Entry Delay Active when you enter the premises.
ICON ACTION NOTES
Enter your 4-digit user code.
The partition is disarmed and the Arming screen displays Ready
to Arm. (See page 10 for more about Partitions.)
NOTE: If you have a commercial system and a time window has
been defined for when you may disarm the system, the system
does not disarm if you are outside that time window.
To disarm the system when you're on the premises:
ICON ACTION
1. Press the Disarm button
2.
Enter your 4-digit user code.
To disarm Multi-Partitions:
ICON ACTION NOTES
1. Touch the Security icon.
2. Touch the Arm Multi-Partition icon.
3. Touch the Disarm icon.
4. Enter your 4-digit user code.
5. Highlight the partition(s) to disarm and press
or press
to disarm all partitions.
All selected partitions should be disarmed, user can enter multi-
partition list to check the status of partitions.
To Next Page
Loading...
Need help?
General
