120 8680i User Guide
UPC-E1
Most U.P.C. bar codes lead with the 0 number system. For these codes, use UPC-E0
(page 117). If you need to read codes that lead with the 1 number system, use the
UPC-E1 On selection. Default = Off.
EAN/JAN-13
<Default All EAN/JAN Settings>
EAN/JAN-13 On/Off
Convert UPC-A to EAN-13
When UPC-A Converted to EAN-13 is selected, UPC-A bar codes are converted to
13 digit EAN-13 codes by adding a zero to the front. When Do not Convert UPC-A
is selected, UPC-A codes are read as UPC-A.
UPC-A Converted to EAN-13
To Next Page
Loading...
