8680i User Guide 145
Aztec Code
< Default All Aztec Code Settings >
Aztec Code On/Off
Aztec Code Message Length
Scan the bar codes below to change the message length. Refer to Message Length
Description (page 94) for additional information. Minimum and Maximum
lengths = 1-3832. Minimum Default = 1, Maximum Default = 3832.
Aztec Append
This function allows the 8680i to append the data from several Aztec bar codes
together before transmitting them to the host computer. When the 8680i encoun-
ters an Aztec bar code with the append trigger character(s), it buffers the number
of Aztec bar codes determined by information encoded in those bar codes. Once
the proper number of codes is reached, the data is output in the order specified in
the bar codes. Default = On.
To Next Page
Loading...
