8680i User Guide 29
The sounds are as follows:
Scanner Power Time-Out Timer
When there is no activity within a specified time period, the 8680i enters low power
mode. Scan the appropriate power time-out bar code to change the time-out dura-
tion (in seconds).
Note: Scanning zero (0) is the equivalent of setting no time-out.
Setting Sound
0 3 long beeps, medium pitch
1 3 long beeps, high pitch
2 4 short beeps, medium pitch
3 4 short beeps, high pitch
4 single chirps, medium pitch
5 2 chirps, then 1 chirp, medium pitch
6 single chirps, high pitch
7 2 chirps, then 1 chirp, high pitch
To Next Page
Loading...
