8680i User Guide 41
INPUT/OUTPUT SETTINGS
Power Up Beeper
The 8680i can be programmed to beep when it’s powered up. Scan the Off bar code
if you don’t want a power up beep. Default = Power Up Beeper On - Scanner.
Beep on BEL Character
You may wish to force the 8680i to beep upon a command sent from the host. If
you scan the Beep on BEL On bar code below, the 8680i beeps every time a BEL
character is received from the host. Default = Beep on BEL Off.
Power Up Beeper Off -
Scanner
* Power Up Beeper On -
Scanner
To Next Page
Loading...
