Honeywell 8680i

130 8680i User Guide
MSI Check Character
Different types of check characters are used with MSI bar codes. You can program
the 8680i to read MSI bar codes with Type 10 check characters. Default = Validate
Type 10, but Don’t Transmit.
When Check Character is set to Validate Type 10/11 and Transmit, the 8680i only
reads MSI bar codes printed with the specified type check character(s), and trans-
mits the character(s) at the end of the scanned data.
When Check Character is set to Validate Type 10/11, but Don’t Transmit, the unit
only reads MSI bar codes printed with the specified type check character(s), but
does not transmit the check character(s) with the scanned data.
* Validate Type 10, but Don’t
Transmit
Validate Type 10 and Transmit
Validate 2 Type 10 Characters,
but Don’t Transmit
Validate 2 Type 10 Characters
and Transmit
Validate Type 11 then Type 10
Character, but Don’t Transmit
Validate Type 11 then
Type 10 Character and Transmit
Disable MSI Check Characters