Honeywell 900U02-0100 - Figure 59 - 32 Point DC Input Module Wiring

Revision 10 ControlEdge HC900 Process & Safety Controller User and Installation Manual 109
May 2019
32 point DC Input Module Wiring
The 32-point DC Digital Input module (Figure 59) provides two groups of 16 inputs, each with a pair of
terminals for connection to common. DC power applied between the common terminal and an input cause
the input to turn ON. A green LED on the module provides indication of an ON state. Logic in the
controller allows the state to be inverted when necessary.
Requires Low Voltage Euro style 36-terminal terminal block.
Figure 59 – 32 point DC Input Module Wiring