Revision 10 ControlEdge HC900 Process & Safety Controller User and Installation Manual 177
May 2019
8.5. File Download/Upload Functions
The following is a general description of file transfers between the controller and computer devices
external to the controller.
CAUTION
Performing download procedures incorrectly could cause loss of control in an
operating process or loss of data and program files in a controller.
Refer to the appropriate User's Manuals for download/upload procedures.
Failure to comply with these instructions may result in product damage.
Two types of software files can be downloaded to the controller:
Configuration files
Firmware files.
Configuration files can also be uploaded from the controller for archiving. Firmware can only be
downloaded to the controller. Pathways for file transactions between the controller and computer devices
external to the controller are shown in Figure 98.
Figure 98 – Pathways for Upload/Download Transactions
To Next Page
Loading...
