Honeywell 900U02-0100 - Page 155

Revision 10 ControlEdge HC900 Process & Safety Controller User and Installation Manual 141
May 2019
E110/100 Base-T
RJ45
Host, Peer, and
Internet Devices
Shielded CAT5 cable,
up to 100 meters.
RJ45 connector on Host,
Peer, or Internet Device
Default IP address is
192.168.1.254
E210/100 Base-T
RJ45
Host, Peer, and
Internet Devices
Shielded CAT5 cable,
up to 100 meters.
RJ45 connector on Host,
Peer, or Internet Device
Default IP address is
192.168.2.254
E110/100Base-T
RJ45
Lead CPU supports
redundant
Modbus/TCP
Protocol to OPC
server, PC
supervisory and
data acquisition
software packages
and Designer
configuration
software.
Default IP address is
192.168.1.254
E2
10/100Base-T
RJ-45
Lead CPU supports
redundant
Modbus/TCP
Protocol to OPC
server, PC
supervisory and
data acquisition
software packages
and Designer
Software
configuration
software.
Default IP address is
192.168.2.254
I/O
100Base-T
Single I/O rack
Shielded Ethernet
CAT5 cable with RJ-
45 connectors
C50/C70 Controller’s I/O
port to Scanner 1’s I/O
port.
No foreign messaging
permitted
I/O
100Base-T
Single I/O rack
Shielded Ethernet
CAT5 cable with RJ-
45 connectors
C75 CPU A’s I/O port to
Scanner 2’s I/O A port.
C75 CPU B’s I/O port to
Scanner 2’s I/O B port.
No foreign messaging
permitted