Honeywell BW GasAlertMicro 5 - Page 104

GasAlertMicro 5/PID/IR
User Manual
94
Clock icon is flashing. The clock has failed. Contact BW Technologies by Honeywell.
There is communication failure. Contact BW Technologies by Honeywell.
The detector displays a
clock error message using
last recorded time.
General fault. Reactivate the detector. If the same error message displays, reset the clock
in the user options menu. Reactivate the detector.
If the error message still displays, contact BW Technologies by Honeywell.
www.GlobalTestSupply.com
Find Quality Products Online at: sales@GlobalTestSupply.com