11
GasAlertMicro 5/PID/IR
Buttons
Buttons
Table 6. Button
Button Description
A
• To activate the detector press A.
• To deactivate the detector, press and hold A until the countdown is complete.
G
• To increment the displayed value or scroll up, press G.
• To enter the user options menu, press and hold G and H simultaneously until the countdown is complete.
• To clear the TWA, STEL, and peak (MAX) gas exposure readings, press and hold C and G simultaneously
until the countdown is complete.
• To view the date and time, alarm setpoints (TWA, STEL, low, high) of all sensors, and the LEL/PID correction factor
(if applicable) press G.
H
• To decrement the displayed value or scroll down, press H.
• To initiate calibration and to define alarm setpoints, press and hold C and H simultaneously until the countdown
is complete.
C
• To view the TWA, STEL, and peak (MAX) gas exposure readings, press C.
• To acknowledge latched alarms, press C. Refer to
Latched Alarms on page 24.
www.GlobalTestSupply.com
Find Quality Products Online at: sales@GlobalTestSupply.com
To Next Page
Loading...
