Honeywell BW GasAlertMicro 5 - Datalogger Functionality

GasAlertMicro 5/PID/IR
User Manual
72
Datalogger
Detectors equipped with the datalogger option record information that
can be compiled to create a report. To set how often the detector records
a sample (1-127 seconds), refer to Logger Option
in the user options
menu.
The following information is recorded in a datalog:
• Date and time
• Serial number of the detector
• Type of gas the detector monitors
• Gas reading(s) that display
• STEL and TWA readings
• Sensor status
• Detector status
• Passcode protect enabled/disabled
• STEL period setting
• Confidence beep enabled/disabled
• Automatic backlight enabled/disabled
• Stealth mode is enabled/disabled
• Latching alarm enabled/disabled
• Calibration past due option enabled/disabled
• Language the detector is set to display
MMC/SD Card Compatibility
For a list of compatible memory cards, please contact BW Technologies
by Honeywell.
Inserting the MMC/SD Card
To insert the MMC/SD card into the detector, refer to the following steps
1-5 and Figure 12.
.
1. Deactivate the detector.
2. Release the latch and remove the battery pack.
3. Insert the MMC/SD card (pins face down).
4. Replace the battery pack and secure the latch.
5. Activate the detector. The MMC/SD card is automatically for-
matted during the startup self-test.
www.GlobalTestSupply.com
Find Quality Products Online at: sales@GlobalTestSupply.com