Honeywell BW GasAlertMicro 5 - Page 108

GasAlertMicro 5/PID/IR
User Manual
98
Visual alarm: Dual red light-emitting diodes (LED)
Display: Alphanumeric liquid crystal display (LCD)
Backlight: Automatically activates during an alarm condition and when
there is insufficient light to view the LCD (if enabled in user options)
Self-test: Initiated during activation
Calibration: Automatic zero and automatic span
Oxygen sensor: Automatic span upon activation (enable/disable option)
User options: Confidence beep, latching alarms, passcode protection,
enable/disable safe display mode, combustible sensor measurement,
sensor disable, TWA and STEL, language selection, enable/disable
automatic oxygen calibration, define span concentration values, define
STEL calculation period, define TWA method, gas measurement resolu-
tion, enable/disable automatic backlight, adjust clock calendar, and
define logging rate (datalogger models only), CO
2
sensor measurement
Approved MMC and SD cards for GasAlertMicro 5 and GasAlertMi-
cro 5 PID: Contact BW Technologies by Honeywell
for more information.
Approved MMC and SD cards for GasAlertMicro 5 IR: Contact BW
Technologies by Honeywell for more information.
Battery operating time:
Toxic, O
2
, and LEL sensor configuration: Three alkaline cells or one
lithium battery pack at 20°C provides 20 hours operating runtime
Toxic, O
2
, LEL, and PID sensor configuration: Three alkaline cells or
one lithium battery pack at 20°C provides 15 hours operating runtime
Toxic, O
2
, LEL, and CO
2
sensor configuration: Three alkaline cells or
one lithium battery pack at 20°C provides 15 hours operating runtime
Year of manufacture: The detector’s year of manufacture is determined
from the serial number. The second and third number after the first letter
determines the year of manufacture.
E.g., H311
-Y001000 = 2011 year of manufacture
Approved Batteries:
Approved batteries for GasAlertMicro 5, GasAlertMicro 5 PID, and
GasAlertMicro 5 IR product:
Alkaline (M5-BAT02): as per standards EN 60079-11, EN 60079-0,
UL913, CSA C22.2 No. 157
Lithium-ion polymer (M5-BAT07), as per standards EN 60079-11, EN
60079-0, UL913, CSA C22.2 No. 157
Lithium-ion polymer (M5-BAT08): as per standards EN 60079-11, EN
60079-0, EN 60079-29-1, EN 50104, UL913, CSA C22.2 No. 157
Rechargeable battery (M5-BAT08) Temperature code
Lithium polymer -20°C ≤ Ta ≤ +50°C T4
Alkaline batteries:
Duracell MN1500 -20°C ≤ Ta ≤ +50°C T4 (129.9°C)
Energizer E91VP -20°C ≤ Ta ≤ +50°C T3C (135.3°C)
www.GlobalTestSupply.com
Find Quality Products Online at: sales@GlobalTestSupply.com