CHAPTER
3
Configuration
Device Configuration
The device configuration can be made through Safety Suite Device Configurator (SSDC) to
enable/disable and define settings for the detector. Refer to the following options for descriptions
and functionality.
Note: The Serial Number and Firmware Version fields require no data entry. Settings for these fields
are factory defined.
Serial Number Field
This field displays the serial number (e.g. MA221-002767) of the detector. It can be found in the
Device List View or in the Details tab (once inside the device's settings)
BW MaxXT II 28 User Manual
To Next Page
Loading...
Need help?
General
