Honeywell BW MaxXT II - Activating and Deactivating the Detector; Detector Power On;Off Procedures

Activating/Deactivating the Detector
Note: Ensure the diffusion cover is attached prior to activating the detector to verify the pump is
working correctly.
To activate the detector, press in a safe area that is free of hazardous gas. Attach any
pump accessories to the detector prior to activating the detector.
To deactivate the detector, press and hold until the OFF countdown completes.
CAUTION
The maximum hose length for sampling is 75 ft (22m).
BW MaxXT II 14 User Manual