Honeywell BW MaxXT II User Manual

Bump and Calibration Results
The detector records the bump test and calibration results. The results can then be imported
into Fleet Manager II to create detailed reports. The following information is recorded in the
Bump/Calibration datalogs:
l Date/time bump tests and calibrations were performed
l Serial number of the detector
l Test performed
l Test results
l Detector user
l Supervisor
l Detector status
l Detector configuration updated during bump test/calibration
l Type of detector
l Location detector was used
l IntelliDoX serial number
l IntelliDoX location
l Last calibration performed
l Next calibration due date
l Last bump test performed
l Next bump test due date
l Datalog interval
l STEL period
l Pump enabled/disabled
l Audible and visual indicator status
l Sensor type and sensor status
l Alarm status
l Sensor status
l Inlet(s) used
l Definables (employee information)
Downloading Datalogs and Event Logs
BW MaxXT II 84 User Manual

Honeywell BW MaxXT II Specifications

General

Brand	Honeywell
Model	BW MaxXT II
Category	Gas Detectors
Language	English