WEBs CIPer Model 50 – USER GUIDE
17 31-00198—01
Dual Ethernet
The CIPer Model 50 is equipped with a Dual Ethernet interface.
All information about the Dual Ethernet can be found in the CIPer 50 Installation & Commissioning Instructions
(31-00233EFS).
Separated networks
SEPARATED NETWORKS = DEFAULT SETTING
For cyber security reasons, the default setting of the Dual Ethernet is with the following IP settings:
• Ethernet port 1: IP address 192.168.200.20, subnet 255.255.255.0
• Ethernet port 2: IP address 192.168.201.20, subnet 255.255.255.0
To Next Page
Loading...
