Honeywell CIPer 50 - Resetting CIPer Model 50 Controller Credentials

WEBs CIPer MODEL 50 – USER GUIDE
33 31-00198—01
• The CIPer Model 50 will disconnect and reboot.
• The default platform passphrase will be active after reboot.
• The default login/password for the platform will be active after reboot.
• The Licenses and Certificates are retained.
• The TCPIP Address Settings are retained.
• Modules are erased.
• Station and station data are erased.
• Firmware is retained.
Upon “installation complete”, press the “Close” button.
Reset CIPer Model 50 controller credentials
For “Resetting platform credentials in the CIPer Model 50 controller”, refer to Honeywell Technical Bulletin
T019-004.