Honeywell CIPer 50 - Part Numbers and Supporting Materials

WEBs CIPer MODEL 50 – USER GUIDE
31-00198—01 22
Part numbers and supporting material
Part Number
(SKU)
Description
Built-in IO
points
Built-in
HMI
WEB-
EAGLENX26ND
100 Global Points (Panel-bus, on-board I/O)
+10 Analytics Points + WEBS N4 Software
Maintenance Agreement
26
-
WEB-
EAGLENX26D
26
Yes
EAGLEH255PUP
255 Additional Panel-bus Expansion I/O Points
PIN-DEV-UP-1
+1 Device and +50 Global points (LON, Modbus, Panelbus, etc.)
TPU-11-01
Spare part for WEB-EAGLENX26ND and WEB-EAGLENX26D. Removable
terminal plugs: push-in type; set of 3 plugs;
TPU-45-01
Spare part for WEB-EAGLENX26D and ND: Removable terminal plugs; push-in
type; set of 9 plugs;
XS831
Set of 10 terminals for converting 0…20mA signals to 0…10VDC: Each set
consists of two groups of four pairs of push-in terminals, each with a 499 Ohm
resistor.
MVC-80-AC1
Terminal cover. Package of ten. Color RAL 9011
MVC-80-AC2
Door mounting frame. Package of ten. Color RAL 9011
MVC-40-AC3
Cabling strain relief. Package of ten.